500
Precision dead center
Type 501 DIN 806 WS Tool steel
Type 505 DIN 807 WS Tool steel
Type 508 DIN 806 E
Carbide insert with full cone point
Type 503 DIN 806 E Carbide insert
Type 506 DIN 807 E Carbide insert
Type 504 DIN 806 HE Carbide insert with half cone point
Type 507 DIN 807 HE Carbide insert with half cone point
| Bestellnummer | ||||||
| Type | MK 1 | MK 2 | MK 3 | MK 4 | MK 5 | MK 6 |
|---|---|---|---|---|---|---|
501 DIN 806 WS |
511 | 521 | 531 | 541 | 551 | 561 |
| 508 DIN 806 E | 518 | 528 | 538 | 548 | 558 | 568 |
| 503 DIN 806 E | 513 | 523 | 533 | 543 | 553 | 563 |
| 504 DIN 806 HE | 514 | 524 | 534 | 544 | 554 | 564 |
| 505 DIN 807 WS | 515 | 525 | 535 | 545 | 555 | 565 |
| 506 DIN 807 E | 516 | 526 | 536 | 546 | 556 | 566 |
| 507 DIN 807 HE | 517 | 527 | 537 | 547 | 557 | 567 |
| Cone | D | L | Angle | d | h | I | L1 | D1 |
|---|---|---|---|---|---|---|---|---|
| MK 1 | 12,20 | 80 | 60° | 7 | 1,5 | 22 | 90 | M 16 x1,5 |
| MK 2 | 18,00 | 100 | 60° | 7 | 2,0 | 30 | 112 | M 22 x1,5 |
| MK 3 | 24,10 | 125 | 60° | 11 | 3,0 | 38 | 138 | M 27 x1,5 |
| MK 4 | 31,60 | 160 | 60° | 14 | 5,0 | 50 | 175 | M 36 x1,5 |
| MK 5 | 44,70 | 200 | 60° | 18 | 7,0 | 63 | 217 | M 48 x1,5 |
| MK 6 | 63,80 | 270 | 60° | 18 | 10,0 | 79 | 290 | M 68 x1,5 |
Product features
- For grinding high precision components
- With carbide tips for machining operations subject to severe wear
- Maximum concentricity run-out 0.003 mm
- High surface quality for optimum seating
- Suitable for a a variety of applications, thanks to different geometries
- Other versions (including hollow tipped) available as special tools
- Please order draw-off nuts separately (p. 29)